Expert Answers about Brake Actuator

• What is Master Cylinder of Demco Trailer Brake Actuator # DM72VR Constructed Of
• The master cylinder (reservoir that holds the brake fluid) used in the Demco Trailer Brake Actuator # DM72VR is constructed of a fiberglass reinforced nylon composite that will not corrode, which makes this actuator perfect for marine applications.
  view full answer...


• Replacement Reverse Lockout Solenoid Quality
• I can ensure you that the majority of our customers have been very pleased with the quality of the Replacement Solenoid Valve for Titan Brake Actuators with Reverse Lockouts part # T4748800. As with any product, improper installation can result in product malfunctions. Because brass is a very soft metal, you will want to be careful when installing. As long as you follow the installation instructions step by step, there should be no need to worry about the quality of this solenoid. Once...
  view full answer...


• What is the Purpose of the Carlisle Control Adapter Module # HBA-CAM
• The CAM from the Carlisle Control Adapter Module # HBA-CAM stands for Control Adapter Module. The purpose of this unit is to adapt the Carlisle HydraStar Electric-Hydraulic Actuator # HBA16 to the following brake controllers. Ford factory controller from 2007-2008 GM/Chevrolet factory controller 2007-Present I attached installation instructions for this product for you to check out also.
  view full answer...


• Is Titan Disc Brake Kit T4843800 Made in the USA?
• The Titan Disc Brake Kit and BrakeRite Electric-Hydraulic Actuator - Tandem, 3,500-lb Axle # T4843800 are great quality but they are not manufactured in the USA. The bearings are also not Timken brand as the manufacturer makes their own bearings. Titan was bought by Dexter which is an USA made company so the major components can be used as an alternative. For instance the Dexter DX Series Electric Over Hydraulic Brake Actuator for Disc Brakes - 1,600 psi # K71-651 can be used as an alternative...
  view full answer...


• Are Zinc Plated Brakes Good For Use In Saltwater
• Yes, the Titan Disc Brake Kit and Leverlock Actuator w/ Electric Lockout part # T4843300 is an excellent option that will do a great job of resisting corrosion. The actuator is coated with a galvanized zinc plating and the calipers and mounting hardware are all dacromet plated. This coating is ideal for saltwater applications and will work well for you. I have also attached a review video of this kit for you.
  view full answer...


• Of What Metal is the Titan Angle Mounting Bracket for Titan BrakeRite Systems # T4821800 Made
• The Titan Angle Mounting Bracket for Titan BrakeRite Systems # T4821800 is made of steel with a raw finish. It has pre-drilled holes that correspond to those in actuator for quick installation.
  view full answer...


• What Material Is Used For The Titan Disc Brake Caliper And Caliper Hardware, #T4747200
• On Titan Disc Brake Kit and Leverlock Actuator w/ Electric Lockout - Tandem, # T4747200, I called Titan to verify the materials and they said the calipers are cast iron, the caliper hardware is stainless steel and the bleeder screw is brass. The piston in the brake caliper is made of stainless steel.
  view full answer...


• Demco Hydraulic Brake Line Kit # DM5426 for Use on 1993 Calkins Trailer in a Marine Environment
• I have confirmed with my contacts at Demco, that the Demco Hydraulic Brake Line Kit # DM5426 is coated with a galvanized finish. With the additional galvanized finish, it provides the additional corrosion resistance that you are looking for compared to steel brake lines. This brake line kit is also 3/16 of an inch in diameter, and is designed for use on single axle trailers. This kit includes lines and fittings needed to run brake fluid from your surge brake actuator to the trailer...
  view full answer...